Solenoid and starter issues will be covered later in the post. If it does, you know it is getting power, and the problem is likely with the solenoid itself or possibly the starter. The solenoid should make an audible “clicking” sound each time you hit the starter. For it to work, you need to make sure it is getting power from the battery. The solenoid works as a switch that sends a high current to your starter when you push the start button or turn the key. Replace it with the right size fuse and try starting again. If your battery is charged, but you still get nothing when turning the key, you may have a blown main fuse.
#Hurtworld v2 wont start manual#
Your user manual will help you locate it. If your fully charged battery drops below 11,5 volts under load (while you crank the starter), it needs to be replaced. Am easy way to test your battery is by checking the voltage-drop with a multimeter as you try starting the bike. If the voltage drops too low, the battery won’t have enough charge to start the bike.Ĭharge the battery or replace it if it’s dead.
Use a multimeter or a voltmeter to check the voltage. Many ATVs are designed not to start when in gear as a safety precaution. Make sure the ATV is in “Park” or Neutral You’d be surprised how often the solution to an ATV that won’t start is forgetting to turn on the kill switch.Īlso, if your ATV has a tether pull cord style kill switch, make sure it is connected properly. Make sure the kill switch/run switch is in the “ON” or “RUN” position. If your ATV doesn’t crank at all when you’re trying to start it, there are a few basic things to look into. The ATV won’t start – the engine is not turning over
The ATV won’t start – it just backfires.When an EFI (electronic fuel injection) ATV is not getting fuel.When a carbureted ATV is not getting fuel.The ATV won’t start – the engine is not turning over.
0 kommentar(er)
